EDGE PRODUCTS 98617 EAS COMPETITION KIT
The EAS Competition Kit gives users the ability to monitor EGTs and add an additional 0-100 PSIg boost and -40F to 300F temp sensors for ultimate control. This kit is designed for those truck owners who have upgraded turbo or turbo's and other mods ,where the stock sensors just aren't enough anymore. This kit is ideal for trucks participating in dyno competitions, sled pulls, and drag racing.
Edge Products Insight CTS3 EP84130-3
Observe and understand your vehicle parameters using Edge state-of-the-art technology. Our Insight CTS3 delivers unmatched monitoring capability for any OBD II vehicle (1996 or newer). This digital gauge display works well with custom tuning products or as a stand-alone monitor for total insight on how your vehicle is performing.
BD-POWER 1057732 THROTTLE SENSITIVITY BOOSTER
The BD-Power 1057732 Throttle Sensitivity Booster increases throttle sensitivity, and reduces that laggy pedal feeling in your Dodge Ram 5.9L&6.7L Cummins, 3.0L EcoDiesel, & Ford Super Duty 6.7L Powerstroke.
HYPERTECH 730120 IN-LINE SPEEDOMETER CALIBRATOR MODULE
The Hypertech 730120 In-Line Speedometer Calibrator for your 2011-2015 Ford 6.7L Powerstroke is an in-line module to correct the speedometer and odometer for non-stock tire sizes and rear gear ratios. This module is perfect for vehicles with computers that dont allow for tire size or rear gear ratio correction or re-calibrate for tire sizes and rear gear ratios outside the range of programmers.
SUPERCHIPS 1545 FORD FLASHCAL FOR TRUCK CALIBRATION TOOL
The Superchips 1545 Ford Flashcal For Truck Calibration Tool is the perfect device for any truck enthusiast. The Flashcal For Truck Calibration Tool allows you to calibrate your truck for large aftermarket
tires, read/clear diagnostic trouble codes, adjust your speed limiter, and more!
EDGE PRODUCTS 98202 BACK-UP CAMERA
The CTS line of products have a built-in video port that allows users to connect Edge’s new state-of-the-art back-up camera. The CTS’s high-resolution, 4.3 inch color screen allows users to see what’s going on behind them with the Edge camera connected. The camera mode on the CTS automatically engages when the vehicle goes into reverse*. The back-up camera option is a must have for towers and safety-conscious drivers.
EDGE EAS SHIFT-ON-THE-FLY ACCESSORY
Easily change custom tunes from the Insight CS2 or CTS2 monitor in your 2011-2014 Ford 6.7L Powerstroke with the Edge
Products 98650 EAS Shift-On-The-Fly Accessory. Forget having to drill a hole in your dash for a manual switch. Tunes can be
conveniently changed right from the screen of your Insight. Many tuning companies utilize a voltage signal to prompt a custom
tune level change. Edge has designed this product to produce voltage signals between 1v, 2v, 3v, 4v, and 5v, right from your
Insight, allowing for tune changes without the need for a separate switch.
Here is how it works:
1. The EAS Shift-on-the-fly accessory, connected to your Insight CTS2, will control your tune levels for vehicles requiring a switch to control the
power levels.
2. Switching occurs by changing voltages between 1v, 2v, 3v, 4v, 5v. Most custom-tuned vehicles run within these parameters.
3. Wire or plug the switch in just as you would your normal Shift-On-The-Fly (SOTF) or Driver-Selectable-Tuning (DST) switch. Then, flash the
tune into your vehicle that enables the SOTF/DST functions.
4. Enjoy changing your power levels right through the Insight CS2 or CTS2 screen!
FEATURES:
No Additional Switches Necessary
Change Your Existing Custom Tunes On-The-Fly From Your Insight CS2 or CTS2
Compatible with EZLYNK & EFIlive SOTF/DST Tuning That Utilizes Voltage Signals To Switch Tunes*
Note:
*To ensure compatibility with your SOTF/DST tunes, please contact us or check with your tune manufacturer.
The Edge Products 98650 takes the place of having to add a separate Shift-On-The-Fly switch to your existing custom tunes. It does not convert
your Insight into a custom tune downloader.
AMP RESEARCH 76404-01A PLUG-N-PLAY PASS THROUGH HARNESS
Use multiple OBDII devides with the Auto Meter 5323 OBDII Splitter. This low profile OBDII Signal Splitter / Pass Through allows for remote location of connections for OBDII products like the Auto Meter AirDrive, DashLink and Dash Control while providing an easy to access connection point for other onboard devices requiring access to the OBDII data stream.
AUTO METER 5323 OBDII SPLITTER
Use multiple OBDII devides with the Auto Meter 5323 OBDII Splitter. This low profile OBDII Signal Splitter / Pass Through allows for remote location of connections for OBDII products like the Auto Meter AirDrive, DashLink and Dash Control while providing an easy to access connection point for other onboard devices requiring access to the OBDII data stream.
