EDGE PRODUCTS 98617 EAS COMPETITION KIT
The EAS Competition Kit gives users the ability to monitor EGTs and add an additional 0-100 PSIg boost and -40F to 300F temp sensors for ultimate control. This kit is designed for those truck owners who have upgraded turbo or turbo's and other mods ,where the stock sensors just aren't enough anymore. This kit is ideal for trucks participating in dyno competitions, sled pulls, and drag racing.
Edge Products Insight CTS3 EP84130-3
Observe and understand your vehicle parameters using Edge state-of-the-art technology. Our Insight CTS3 delivers unmatched monitoring capability for any OBD II vehicle (1996 or newer). This digital gauge display works well with custom tuning products or as a stand-alone monitor for total insight on how your vehicle is performing.
EDGE PRODUCTS 98202 BACK-UP CAMERA
The CTS line of products have a built-in video port that allows users to connect Edge’s new state-of-the-art back-up camera. The CTS’s high-resolution, 4.3 inch color screen allows users to see what’s going on behind them with the Edge camera connected. The camera mode on the CTS automatically engages when the vehicle goes into reverse*. The back-up camera option is a must have for towers and safety-conscious drivers.
EDGE PRODUCTS 98653 EAS SHIFT-ON-THE-FLY ACCESSORY 2011-2016 GM 6.6L DURAMAX (REQUIRES INSIGHT CS2/CTS2)
The Edge Products 98653 EAS Shift-On-The-Fly Accessory gives you the ability to change custom tunes on your Insight CS2 or CTS2 monitor
while driving your 2011-2016 GM 6.6L Duramax. Producing the same voltage signals between 1v, 2v, 3v, 4v, and 5v that a conventional switch
would, your Insight monitor now has even more utility while eliminating the need to drill a hole in your dashboard.
Here is how it works:
1. The EAS Shift-on-the-fly accessory, connected to your Insight CTS2, will control your tune levels for vehicles requiring a switch to control the
power levels.
2. Switching occurs by changing voltages between 1v, 2v, 3v, 4v, 5v. Most custom-tuned vehicles run within these parameters.
3. Wire or plug the switch in just as you would your normal Shift-On-The-Fly (SOTF) or Driver-Selectable-Tuning (DST) switch. Then, flash the
tune into your vehicle that enables the SOTF/DST functions.
4. Enjoy changing your power levels right through the Insight CS2 or CTS2 screen!
FEATURES:
No Additional Switches Necessary
Change Your Existing Custom Tunes On-The-Fly From Your Insight CS2 or CTS2
Compatible with EZLYNK & EFIlive SOTF/DST Tuning That Utilizes Voltage Signals To Switch Tunes*
Note:
*To ensure compatibility with your SOTF/DST tunes, please contact us or check with your tune manufacturer.
The Edge Products 98653 takes the place of having to add a separate Shift-On-The-Fly switch to your existing custom tunes. It does not convert
your Insight into a custom tune downloader.
AMP RESEARCH 76404-01A PLUG-N-PLAY PASS THROUGH HARNESS
Use multiple OBDII devides with the Auto Meter 5323 OBDII Splitter. This low profile OBDII Signal Splitter / Pass Through allows for remote location of connections for OBDII products like the Auto Meter AirDrive, DashLink and Dash Control while providing an easy to access connection point for other onboard devices requiring access to the OBDII data stream.
AUTO METER 5323 OBDII SPLITTER
Use multiple OBDII devides with the Auto Meter 5323 OBDII Splitter. This low profile OBDII Signal Splitter / Pass Through allows for remote location of connections for OBDII products like the Auto Meter AirDrive, DashLink and Dash Control while providing an easy to access connection point for other onboard devices requiring access to the OBDII data stream.
