1998.5-2018 DODGE 5.9L/6.7L CUMMINS (2013-2018 REQUIRES COMMOD)

Edge Products is pleased to announce the 2013-2017 Cummins Unlock Insight CTS2. This is a new SKU (PN 84132) intended to pair industry-leading data monitoring with the ability to unlock a very popular application. Now Supporting Chassis Cabs! This Insight is a monitor device and does not deliver custom tuning to the truck.

FOR USE ON SMARTY TOUCH & MM3

The EAS Competition Kit gives users the ability to monitor EGTs and add an additional 0-100 PSIg boost and -40F to 300F temp sensors for ultimate control. This kit is designed for those truck owners who have upgraded turbo or turbo's and other mods ,where the stock sensors just aren't enough anymore. This kit is ideal for trucks participating in dyno competitions, sled pulls, and drag racing.

Observe and understand your vehicle parameters using Edge state-of-the-art technology. Our Insight CTS3 delivers unmatched monitoring capability for any OBD II vehicle (1996 or newer). This digital gauge display works well with custom tuning products or as a stand-alone monitor for total insight on how your vehicle is performing.

BD-POWER 1036615 HIGH IDLE CONTROL 2018-2020 FORD F-150 3.0L POWERSTROKE

FOR USE ON SMARTY S06 POD, SSR & JR J-06, S2G, MM3

The BD-Power 1057732 Throttle Sensitivity Booster increases throttle sensitivity, and reduces that laggy pedal feeling in your Dodge Ram 5.9L&6.7L Cummins, 3.0L EcoDiesel, & Ford Super Duty 6.7L Powerstroke.

The CTS line of products have a built-in video port that allows users to connect Edge’s new state-of-the-art back-up camera. The CTS’s high-resolution, 4.3 inch color screen allows users to see what’s going on behind them with the Edge camera connected. The camera mode on the CTS automatically engages when the vehicle goes into reverse*. The back-up camera option is a must have for towers and safety-conscious drivers.

2010-2018 DODGE 6.7L CUMMINS (REQUIRES SMARTY TOUCH)

EDGE PRODUCTS ACCESSORY SYSTEM EAS (EXPANDABLE) 5VOLT KIT DESIGNED FOR USE WITH THE EDGE PRODUCTS CS2/CTS2/CTS3

Our EGT solutions kit for the 13-18 Dodge Cummins was created to allow users to read their exhaust gas temperatures after installing a Cooler Upgrade Kit. The kit comes with a blocker plate w/provisions for an exhaust probe, and an extended cable that will reach to the factory harness.

Use your Insight CS2 or CTS2 monitor to easily switch custom tunes in your 2010-2018 Dodge Ram 6.7L Cummins with the Edge Products 98652 EAS Shift-On-The-Fly Accessory. This EAS accessory produces the same voltage signals between 1v, 2v, 3v, 4v, and 5v that a conventional switch would, right from your Insight, giving you the ability to switch between your custom tune files while driving! Forget having to drill a hole in your dash for a manual switch.

FOR USE WITH SMARTY TOUCH PROGRAMMER

Edge's EAS Pressure Sensor is a 0 - 100 PSIg 1/8 NPT sensor that plugs directly into the Universal Sensor Input system (p/n 98605).

EAS STARTER KIT W/ 15IN EGT CABLE CS/CTS/CS2/CTS2

Put your factory EGT Probe back in to your 2013-2018 Dodge 6.7L Cummins with the GDP EZCEGT EZ LYNK EGT Solution Kit.
NEW STOCK # GDP611013

EAS STARTER KIT W/ 15IN EGT CABLE CS/CTS/CS2/CTS2

Our EGT solutions kit for the 13-18 Dodge Cummins was created to allow users to read their exhaust gas temperatures after installing a Cooler Upgrade Kit. The kit comes with a blocker plate w/provisions for an exhaust probe, and an extended cable that will reach to the factory harness.

(1)

GDP Tuning's CSP4/5 switch allows you to easily change your EFILive CSP4/5 tunes at the Twist of a knob.

SDP Dodge 19+ Up 6.7 EGT wiring extension cable.

Expand the functionality of the GDP EZ LYNK Tuner in your 2010-2017 Dodge 6.7L Cummins with the GDP EZC1317S Shift-OnThe-Fly Switch. This switch features an easy to install, plug and play design that works in conjunction with your EZ LYNK Tuner.

(1)

Use multiple OBDII devides with the Auto Meter 5323 OBDII Splitter. This low profile OBDII Signal Splitter / Pass Through allows for remote location of connections for OBDII products like the Auto Meter AirDrive, DashLink and Dash Control while providing an easy to access connection point for other onboard devices requiring access to the OBDII data stream.

GDP Tuning GDP10025 Universal 5 Position Rotary Switch gives you the ability to switch EZLYNK tunes on-the-fly in your 2008-2019 Ford Powerstroke or 2010-2019 Dodge Ram Cummins.

EDGE PRODUCTS ACCESSORY SYSTEM EAS (EXPANDABLE)

The Edge Products 98920 EAS Replacement EGT Lead is a replacement for the original lead that comes with the Edge Products 98620. 15" Lead Replacement for 98620

Use multiple OBDII devides with the Auto Meter 5323 OBDII Splitter. This low profile OBDII Signal Splitter / Pass Through allows for remote location of connections for OBDII products like the Auto Meter AirDrive, DashLink and Dash Control while providing an easy to access connection point for other onboard devices requiring access to the OBDII data stream.