GDP TUNING R110DGP EFILIVE AUTOCAL TUNER
EFILive tuning for the 2001-2010 Duramax is now available to meet your desired horsepower gains. Each AutoCal will come with 5 tunes. When you purchase a GDP Tuning AutoCal you will be ready to unleash the beast that’s is locked inside of your truck. 2001-2006 DSP5 TUNING ONLY
EDGE PRODUCTS 98617 EAS COMPETITION KIT
The EAS Competition Kit gives users the ability to monitor EGTs and add an additional 0-100 PSIg boost and -40F to 300F temp sensors for ultimate control. This kit is designed for those truck owners who have upgraded turbo or turbo's and other mods ,where the stock sensors just aren't enough anymore. This kit is ideal for trucks participating in dyno competitions, sled pulls, and drag racing.
BULLY DOG 40420 TRIPLE DOG GT PLATINUM DIESEL DOWNLOADER
The Bully Dog GT 40420 is a performance tuner AND monitor all in one compact electronic device! Get more horsepower, torque, and increase fuel efficiency in your truck with Bully Dog’s legendary tuning. All you need to do is plug the GT Tuner into your OBDII Port and perform a simple download to the vehicles ECU.
Edge Products Insight CTS3 EP84130-3
Observe and understand your vehicle parameters using Edge state-of-the-art technology. Our Insight CTS3 delivers unmatched monitoring capability for any OBD II vehicle (1996 or newer). This digital gauge display works well with custom tuning products or as a stand-alone monitor for total insight on how your vehicle is performing.
SUPERCHIPS 2845 FLASHPAQ F5 TUNER
The Superchips 2845 Flashpaq F5 Tuner is the all-in-one solution to adding power and performance to your 2001-2016 GM 6.6L Duramax. The Flashpaq F5 is a handheld performance programmer with an easy-to-use, high-resolution color screen that comes complete with scanning features and of course performance tuning for your truck.
EDGE PRODUCTS 98202 BACK-UP CAMERA
The CTS line of products have a built-in video port that allows users to connect Edge’s new state-of-the-art back-up camera. The CTS’s high-resolution, 4.3 inch color screen allows users to see what’s going on behind them with the Edge camera connected. The camera mode on the CTS automatically engages when the vehicle goes into reverse*. The back-up camera option is a must have for towers and safety-conscious drivers.
BULLY DOG SENSOR STATION W/ PYROMETER PROBE 40384
The Bully Dog Sensor Station is an add-on that allows you to read EGT's on your GT Tuner, PMT & Watchdog. Additional sensors such as thermocouples, speed sensors, boost sensors & liquid temperature sensors can also be added to monitor even more on your Bullydog Tuner!
EDGE PRODUCTS 98654 EAS SHIFT-ON-THE-FLY ACCESSORY 2004.5-2010 GM 6.6L DURAMAX (REQUIRES INSIGHT CS2/CTS2
The Edge Products 98654 EAS Shift-On-The-Fly Accessory gives you the ability to easily change custom tunes from the Insight
CS2 or CTS2 monitor in your 2004.5-2010 GM Silverado/Sierra 6.6L Duramax. Forget having to drill a hole in your dash for a
manual switch. Tunes can be conveniently changed right from the screen of your Insight. Many tuning companies utilize a voltage
signal to prompt a custom tune level change. Edge has designed this product to produce voltage signals between 1v, 2v, 3v, 4v,
and 5v, right from your Insight, allowing for tune changes without the need for a separate switch.
Here is how it works:
1. The EAS Shift-on-the-fly accessory, connected to your Insight CTS2, will control your tune levels for vehicles requiring a switch to control the
power levels.
2. Switching occurs by changing voltages between 1v, 2v, 3v, 4v, 5v. Most custom-tuned vehicles run within these parameters.
3. Wire or plug the switch in just as you would your normal Shift-On-The-Fly (SOTF) or Driver-Selectable-Tuning (DST) switch. Then, flash the
tune into your vehicle that enables the SOTF/DST functions.
4. Enjoy changing your power levels right through the Insight CS2 or CTS2 screen!
FEATURES
No Additional Switches Necessary
Change Your Existing Custom Tunes On-The-Fly From Your Insight CS2 or CTS2
Compatible with EZLYNK & EFIlive SOTF/DST Tuning That Utilizes Voltage Signals To Switch Tunes
*
Note:
*To ensure compatibility with your SOTF/DSP5 tunes, please contact us or check with your tune manufacturer.
The Edge Products 98650 takes the place of having to add a separate Shift-On-The-Fly switch to your existing custom tunes. It does not convert
your Insight into a custom tune downloade
BULLY DOG 33302 CUSTOM A-PILLAR MOUNT W/O SPEAKER HOLE
The Bully Dog Custom Gauge Pods have been designed to work with our PMT, GT Gas, GT Diesel, and the Bully Dog WatchDogs. Also fits H&S Black Maxx & Mini Maxx. These custom pods offer a clean OEM-like fit for your Bully Dog performance product.
BULLY DOG 33303 CUSTOM A-PILLAR MOUNT W/ SPEAKER HOLE
The Bully Dog Custom Gauge Pods have been designed to work with our PMT, GT Gas, GT Diesel, and the Bully Dog WatchDogs. Also fits H&S Black Maxx & Mini Maxx. These custom pods offer a clean OEM-like fit for your Bully Dog performance product.
BULLY DOG 30600 RAM SUCTION CUP MOUNTING KIT
The Bully Dog 30600 RAM� Heavy Duty Suction Cup Mounting Kit is the best suction cup mount on the market. Bully Dog has partnered with National Products Inc. to bring these truly awesome mounting kits to the GT, PMT and WatchDog platforms.
