Home > Ford >

DIESELSITE 6.4L HOTSIDE LOWER INTERCOOLER BOOT KIT

DIESELSITE 6.4L HOTSIDE LOWER INTERCOOLER BOOT KIT
 
Our Price: $89.00


Product Code: DSIBK6
Qty:

Description
 
The kit includes the boot that connects the intercooler pipe to the intercooler. It includes two T-bolt spring clamps. The spring bolt clamps are 300 series stainless steel with zinc coated bolts with a 300lb clamping strength. Recommended torque is 60 in/lbs.

This boot kit is designed to replace leaking, deteriorated boots on the 2008-2010 6.4L Ford Powerstroke. (Also fits 03-07 6.0 at lower hose side)Stock boot material is silicon. However, this type of material is NOT oil compatable. This is unacceptable in our application as the Powerstroke incorporates a closed crankcase vent system. This means oil travels thru the intake and comes in constant contact with the boots. This oil contact causes deterioration and leaks due to the incompatibility of the silicon boots and the oil from your crankcase. In fact, if you have seen an oil mist all over the valley of your PSD and wondered where it was coming from, chances are it was caused by leaking, deteriorated stock boots. The stock boots WILL leak air and oil. In many cases, 3-4psi leaks are very common.

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

Ford
Ford > Ford Powerstroke 2003-2007 6.0L
Ford > Ford Powerstroke 2003-2007 6.0L > Intercoolers
Ford > Ford Powerstroke 2008-2010 6.4L
Ford > Ford Powerstroke 2008-2010 6.4L > Intercooler Pipes
Ford > Ford Powerstroke 2008-2010 6.4L > Intercoolers