MADS Smarty SR (on-road) S67 Dodge Cummins Turbodiesel 6.7L 07.5-12

Fast guide to Smarty’s special Features

• CaTCHER software's
  inside
• Ten different
  performance levels
• Fastest download in the
  industry, up to three times faster than the
  competition, a typical ECM update takes about 5 minutes
• ABS tire height updates
  in just few seconds
• Manual High Idle is
  enabled in all softwares
• Reads Diagnostic Trouble
  Codes in plain text
• No tools required, no
  fuses to pull
• USB built in for simple
  updates
• Free internet updates
• Most complete keyboard
  in the industry
• Reliable, it works off
  your OEM hardware
• Programmable Speed
  Limiter from 25 to 250 mph
• Programmable parameters
  for fine tuning
• Power on Demand**
• ** PoD function not yet available for MY 2010 and above trucks

*** Unlike the Smarty S06 for the 5.9L, the Smarty S67 is not untraceable

Fast guide to Smarty's software levels

The horsepower settings. except #0, all other
softwares have a modified "Torque management" ( TQM ). The throttle response is
greatly improved but is set to a safe limit. With "Safe" I mean safe for
your tranny and rest of the driveline.

• SW # 0 : Half power
• SW # 1 : 30 hp increase,
  with added timing
• SW # 2 : 60 hp increase,
  no added timing ***
• SW # 3 : 60 hp increase,
  with added timing
• SW # 4 : 90 hp increase,
  no added timing ***
• SW # 5 : 90 hp increase,
  with added timing
• SW # 6 : 130 hp
  increase, no added timing ***
• SW # 7 : 130 hp
  increase, with added timing
• SW # 8 : 170 hp
  increase, no added timing *** °°°
• SW # 9 : 170 hp
  increase, with added timing °°°

°°° Do not use for prolonged high speed runs! Speeds exceeding approx
105
MPH can result in high exhaust gas temperatures and damage the Diesel
Particulate Filter (DPF) !!!
*** All even numbered softwares (2-4-6-8) without timing are to be used for
stacking with other after market power adding devices that also add their own
timing. NO additional timing has to be used with the odd numbered softwares (1-3-5-7-9).
Severe engine damage will result !!!
Tested on stock trucks
on our in house Dyno Dinamics Twin Retarder Dyno.
Stock means just that. Stock! Even the air filters were stock...
We checked the "baseline" ( the stock truck hp at the rear wheels )
twice in a day in order to be sure about our findings. The above
declared hp numbers are all rounded down to the closest number. For
example the 90 hp file actually did 96 hp. That's a 90 hp software for
me, not a 100. The 170 hp was 176.
ABS / Speedo recalibration
The tire height can be adjusted up to 44" in increments of 10 tenth of
an inch in just a couple seconds. Of course, Smarty needs to be VIN#
locked to the truck in order to get into the ABS adjustment section.
DTC Code reader
The name says it all.
You can read and erase codes. Codes are displayed also in plain
English. That's old news by now. Smarty S-03 was the first one to
provide that utility, others found the idea to be a good one too.
( Smarty does erase ABS codes too but does not display them )
ECM update speed
Faster than anything else on the market! Again we've done our
homework on the protocol. Less than 5 minutes. Three times faster
than a Star-Scan diagnostic tool or competitor.
We have developed our own bootloader in order to not have to pull
fuses should an update become interrupted for any reason. All you
have to do is to turn the key off / key on Smarty does everything else
on it's own.
Updates
The CaTCHER softwares as they are today are only a starting point.
Expect major news in future. We’re for your feedback, opinions, likes,
dislikes...
We will make Smarty do what YOU want, TOGETHER.